First, the water retaining strip. Many owners think that it is enough to lay the floor of the shower area with an inclined floor drain, but the drain speed of the floor drain is slower than the flushing speed of the shower. Therefore, water retaining strips should be installed on the floor of the shower area. The water barrier must be laid on the outside of the shower curtain so that the water will not flow down the shower curtain to the outside of the shower area. It is best to choose natural stone water retaining strips with a thickness of 1 to 2 cm. It is enough to choose mold-proof high-quality glass glue to lay on the periphery of the shower curtain.
Second, the way the shower curtain is hung. One is to install a flexible shower curtain track, and the other is to install a shower curtain rod. Special attention should be paid to the installation of the flexible shower curtain track. Nowadays, aluminum gussets are installed in bathrooms, and the flexible shower curtain track is installed on the aluminum gussets. Therefore, it is necessary to determine the specific installation position of the track, and then reinforce the keel at the corresponding position. Shower curtain rods are divided into expansion rods and fixed on the wall with nuts. If you use a straight shower curtain rod at home, and there are wall support points on both sides, you can choose an expansion rod. This kind of shower curtain rod is easy to install and move, and you can also put a bath towel and the like. For the arc-shaped shower curtain rod, it is better to choose the one with the two ends fixed to the wall with nuts to be safer, and you must choose the stainless steel tube, which should be thicker and stronger.
Third, the choice of shower curtain. The length of the shower curtain must be appropriate, and the bottom should be about 2 cm above the ground. Choosing the right shower curtain can add a lot of color to the bathroom.